GW Die Cutters

GW T-1060BN Die Cutter With Blanking

An automatic die cutter with stripping and blanking that delivers finished blanks to a pallet, then switches to straight line stripping delivery at the press of a button with no mechanical changeover.

7,500Sheets per Hour
350 tWorking Pressure
1,060 x 760 mmMax Sheet

Request a Quote View Specifications

7,500s/h

Maximum Die-Cutting Speed

350t

Maximum Working Pressure

90 to 2,000gsm

Cardboard Range

2modes

Blanking and Stripping Delivery

How It Works

From Feeder to Finished Blanks

Each sheet travels through five sections in a single pass, leaving the machine as clean, separated blanks ready for folding and gluing.

T-1060BN workflow diagram showing feeding, die cutting, stripping, blanking, and delivery

Feeding
Die Cutting
Stripping
Blanking
Delivery

Key Features

Section by Section

Feeding and Transfer

Non-stop feeding with automatic pile lift and a pre-pile device keeps the machine running while the next stack is loaded.

Feeder head with 4 suckers and 4 forwarders, with an optional MABEG feeder
Maximum feeder pile height of 1,800 mm
Pull and push side lay for thin paper, thick board, and corrugated
Mechanical double sheet detection with an optional supersonic detector

Die-Cutting Unit

Servo-controlled cutting pressure and a centerline chase system deliver accurate registration and fast job changeovers.

Pneumatic quick lock upper and lower chase
Centerline system with transversal micro adjustment
Double cam gripper bar for stable high-speed sheet transfer
19 inch touch screen with precision to 0.01 mm

Stripping Unit

Three-way stripping removes waste in line, with quick lock frames that cut setup time between jobs.

Quick lock and centerline system for the stripping frame
Pneumatic upper frame lifting with micro adjustment
Stripping frame position memory and optional make ready table

Blanking Unit

Finished blanks are separated and stacked automatically, ready to move straight to the folder gluer.

Quick lock and centerline blanking frame
One button sample sheet taking for quality checks
Safety light barrier with independent reset

Dual Mode Delivery

Switch between blanking and stripping jobs from the control panel with no mechanical adjustment needed.

Non-stop horizontal delivery with automatic pallet exchange for blanking
Motorized non-stop straight line delivery for stripping jobs
Straight line delivery pile height up to 1,600 mm

Applications and Configurations

One Machine for Frequent Job Changes

CES will confirm which items are standard and which are optional when preparing your quote.

Materials and Markets

Cardboard from 90 to 2,000 gsm, 0.1 to 3 mm thick, and corrugated board up to 4 mm.

Folding Cartons
Pharmaceutical
Food Packaging
Cosmetics
Luxury Goods
Corrugated

Available Configurations

German MABEG feeder head
Anti-static device for the feeder and transfer table
Supersonic double sheet detector for paper
Stripping make ready table
German Siemens main motor and Pilz safety module

Technical Specifications

T-1060BN Specifications

Specification	T-1060BN
Maximum Paper Size	1,060 x 760 mm41.7 x 29.9 in
Minimum Paper Size	400 x 350 mm15.7 x 13.8 in
Maximum Cutting Size	1,060 x 745 mm41.7 x 29.3 in
Maximum Die-Cutting Plate Size	1,075 x 765 mm42.3 x 30.1 in
Die-Cutting Plate Thickness	4 + 1 mm
Cutting Rule Height	23.8 mm
Gripper Margin	7 to 17 mm
Cardboard Range	90 to 2,000 gsm, 0.1 to 3 mm thick
Corrugated Board	Up to 4 mm
Maximum Working Pressure	350 t
Maximum Die-Cutting Speed	7,500 sheets per hour
Feeder Pile Height (incl. pallet)	1,800 mm70.9 in
Non-Stop Feeding Height (incl. pallet)	1,300 mm51.2 in
Blanking Delivery Height (incl. pallet)	1,400 mm55.1 in
Straight Line Delivery Height	1,600 mm63.0 in
Main Motor Power	18 kW
Total Machine Power	24 kW
Voltage	600 V, 60 Hz, 3 phase
Air Pressure Requirement	6 to 8 bar87 to 116 psi
Air Consumption	300 L/min10.6 cfm